13 Ways to Save Your Drying or Dead Plant

13 Ways to Save Your Drying or Dead Plant

Table of Contents

If you are into gardening, then the reason for you coming here is that you have a dead plant in your hand. It can happen irrespective of how much you care for the plants in your garden. Sometimes, some of the low-maintenance plants end up dead after you give them everything they need. Your heart also feels heavy when a plant dies, along with your ego. But what if we inform you that there is still hope?

Even a plant that appears dead can get its livelihood back if you treat it with utmost care. There are several reasons indoor plants can get dried up or look dead. The most common causes include overwatering, less watering, inadequate sunlight, and, last but not least, pests and bugs. You can get to the core reason for the issue and save your plant from drying up and eventually dying. We are here to help you to guide you in the right direction so that you can save plants and get them to their former glory back.


How Can You Save Your Drying or Dead Plants?

  1. Check Whether the Plant is Truly Dead or Not

You should look for signs of life in your plant which appear to be dead. You may think your plant is dead when the leaves start to look brown and the stem turns dry. But inside, the branch will surely be greenish, and the remaining leaves will be strong. If you notice this in your plant, then keep going.


  1. Get Rid of Dead Foliage

First, cut all your plant's dead parts to save plants. If your plant stem is also dead, but the root shows signs of life, then cut the stem and only leave 5 cm of stem above the ground.

How to Cut Yellow Leaves Off Plants | DIY


  1. Ensure That You Are Not Overwatering Your Plant

We all know that plants require water to survive. But too much water can also be harmful to the plant. Overwatering causes damp soil, which eventually leads to decaying roots. If you are overwatering your plant, then your plant will appear to be yellowish. If you find yourself in this scenario, then to save plants in this condition, keep that plant away from sunlight for some days till the soil dries out.


  1. Is Your Plant Severely Underwatered?

The easiest way to detect whether the plant is underwater is to check the topsoil in the pot. If you notice the topsoil is dry and has cracks in it, it is a result of the plant and soil receiving less water. To save plants and keep them healthy and cheerful, keep watering until the drainage holes are fully cleared.


  1. Bring Your Plant Where It Can Get the Right Amount of Sunlight

Receiving sunlight is another aspect that can affect a plant's livelihood. As a plant parent, you need to ensure that your plant is receiving adequate sunlight. Not receiving proper sunlight will leave the plant leaves pale and the stem weak. Keep your indoor plants for a home where they can get direct sunlight.


  1. Adjust the Humidity Level

Plants from tropical regions require more humidity than you may not realize. You can check for the following signs in a plant to determine whether your plant is receiving less humidity. If your plant is craving humidity, it will show signs of wilting and appear brown. Then you can handle the situation by moving your plant from sunlight to a more humid place.


  1. Offer Additional Nutrition

 Sometimes all your plant requires is a little extra nutrition. Common signs of malnutrition are discoloration of leaves and weak stems. To bring your plant back to life, you can use manure and fertilizer in the soil. Use organic fertilizer to provide much-needed nourishment to save plants.


  1. Repotting

Chatura Self-Watering Pots 

The pot might become small for your plant. The roots of your plant might wind around each other, which makes it difficult for your plant to absorb water and nutrients. So, perform repotting occasionally and always use sturdy pots with a sound drainage system.


  1. Water Your Plants with Filtered Water

Water containing fluorides and chlorine can severely damage the plant, so if you are trying to revive dying plants, try watering them with filtered water.


  1. Change the Soil

The soil your plant grows in may need more nutrients and organic matter. While repotting, filling in nutrient-rich, fresh soil in the pot does wonders to save plants.


  1. Remove the Insects and Diseased Body Parts

 DIYBUG All Insect Killer


If your plant shows signs of insect attack or infection caused by pests, use insecticides and pesticides to get rid of the pests and insects.


  1. Give Your Plants Some Much-Needed Time

Never give up too soon on your plant. After doing whatever you can to save a dying plant, give the plant some time to recover.


  1. Compost Your Plant


Compost Bin 14 L - Set of 2


If, after trying everything, you still cannot save plants, then compost the remaining parts of the plant and use it as fertilizer for other plants in your garden. Use compost bins for this purpose.

Now that you know how to save plants perform all the steps mentioned above until you bring your plant back to life. You can get all the necessary products from Ugaoo. Buy all the products required from Ugaoo and save your indoor plants.

 Buy Plant Care Products

Read More-

How to Get Rid of Bark Eating Caterpillar?

How To Prevent Pine Trees From Yellowing